I’m taking the opportunity to use the photograph I posted earlier today to illustrate a couple of technical points about equipment and technique. Here is a 100% magnification 400 x 400 pixel crop from the far upper corner of the photograph.

Not much to look at, but that isn’t the point. At this resolution, you are looking at what would be a small section from a print that is four or five feet wide. Before I explain why I think this is important, some technical information about the image: Canon 5D, Canon EF 24-105mm f/4 L IS, 2.5 second exposure, f/16, focus point was on the foreground tree seen in the full image (e.g. – perhaps 50 feet closer than the subject of this test image), IS disabled, tripod, mirror lockup, remote release.

Some doubt the ability of this particular lens to produce sharp images. This sample challenges lens performance in a number of ways: it is a very low contrast image, the crop is from the far corner of the frame, the crop is not in the focus plane of the photograph, at f/16 the effects of diffraction blur should be just visible at this magnification.

With all of that context in mind, this cropped sample represents quite good performance. This section of the image would be very sharp, indeed, in a print at 16″ x 24″.

This photograph is not in the public domain. It may not be used on websites, blogs, or in any other media without explicit advance permission from G Dan Mitchell.