So, you have a camera or lens that you think is not as sharp as it should be. If you are already expert at these things, what follows is not for you – you already know how to analyze the problem, you can anticipate possible causes, and you know some of the pitfalls of looking at the issue in unrealistic ways. But if you aren’t certain about how to deal with the issue, perhaps the following might help… so feel free to read on.
Perhaps you just got a new lens or a new camera and you don’t think it is performing as you expected. Or perhaps you have long suspected a problem with your equipment. On the other hand, maybe some gear that you have used with confidence for a while seems to not work as well as you recall it working in the past. It can be tempting to blame the equipment – and in some cases you may be correct – but it is a very good idea to first try to analyze and understand the problem and look for other possible causes… and solutions.
It is critical that you try to control the variables that might give rise to the issue, and then to try to a) determine if the problem is real, and b) figure out specifically what might be the cause. The range of possible causes is larger than you might imagine: problems with the camera’s autofocus (AF) system, an out of adjustment or “weak” lens, less than optimal choice of lens settings, issues with camera stability, insufficient care with the use of AF, using the wrong AF settings, aperture choices, shutter speed choices, subject motion, and more. While a real equipment problem is a possibility, it is probably at least as likely that the problem lies elsewhere. Fortunately there are ways to wade through this minefield and develop some rational understanding of what is going on.
What follows is a sort of ad hoc description of how I might approach this. It is not meant to be the only way to deal with such issues, it leaves out some possibilities, and the sequence could be changed around in some ways. Continue reading “My Photos Are Soft!”